Security Products

The number of reported thefts of Defenders has skyrocketed in the last couple of years, with a reported increase of 69% in North Yorkshire between 2015 and 2016. Insurance specialists are advising owners of these iconic vehicles to be aware of the risks, and take adequate precautions to discourage and prevent theft.

Understandably, there has been an increase in the number of security products for Defenders in the last year, with a range of solutions available for every budget. We’ve collected some of the most popular here.

Skytag – Tracker DA9012

da9012

With a increasing amount of Land Rovers being stolen, why not install a Skytag tracking system to help increase the chances of your vehicle being recovered? The Skytag Vehicle Recovery System was recently featured on the BBC programme “Thief Trackers”, where a Defender was quickly recovered thanks to the Skytag tracking device that was fitted. Skytag are now largest independent stolen vehicle recovery company in the UK, providing state of the art location equipment to recover your property quickly and efficiently. With an outstanding recovery record and an 11 minute fastest record, they are proud to offer a service second to none. With unique features like monthly operation checks and direct police access to live location information.

DA9012

X-Column

da9013

This neat solution is a sleeve for the lock barrel assembly machined out of steel. It is strong enough to prevent the barrel being removed or the end broken off. The best thing about this solution is it’s completely passive – i.e. nothing to lock or unlock. It stays permanently fitted to the vehicle providing 24 hour protection and deterrent value. The column lock will fit all Defenders LHD or RHD – up to 2014, including Puma/Tdci. One exception is that some ex-military vehicles do not have a steering lock. While the column lock will fit – it serves no purpose as there is nothing for it to protect.

DA9013

TAMPER PROOF NUTS & BOLTS

stub axle kits

Ensure your precious accessories remain firmly on your Land Rover by using these tamper proof nuts and bolts; ideal for securing expensive parts like your winch and bumpers. Each set contains 4 nuts or bolts and 1 key.

DA7333 Bolt set – M10 x 110
DA7334 Bolt set – M10 x 35
DA7332 Nut set – M10
DA7331 Nut set – M8
DA7330 Nut set – M6

SECURITY MARKING KIT

DA8533

The International Security Register (ISR) system has proved successful in deterring and detecting theft and fraud for over 30 years. It works on the principle that if a vehicle’s windows and parts are marked using robust techniques and details are recorded on a secure database – supported by a 24/7 verification service – criminals stealing the vehicle will run a real risk of being caught and prosecuted.The pack contains full instructions, and materials for marking glass, body panels, and plastic parts.

DA8533

X-DEFEND PEDAL LOCK – DEFENDER

DA6601 (1)

The X-Defend Pedal Lock prevents the clutch, brake and throttle pedal from being operated, making a vehicle almost impossible to drive! Unlike other pedal locks, this remains bolted to the floor of the vehicle. When not in use, it folds flat on the floor and seat box, forming the floor of the cab. In this position it can be covered with your usual floor mat, meaning you don’t have to store a 20kg lump of metal which could be lethal if it hit you in the event of an accident or while off-roading. It also means that locking is incredibly quick. Just release the catch which holds it against the seat box and lock into position. A 10mm thick steel claw grabs the brake pedal shaft and ratchets in tight against it. It can be locked in a couple of seconds! To unlock turn the key which releases the pedal and fold flat on the floor.The Pedal Lock is supplied in tough, corrosion proof 304 stainless steel and uses formed hinges with a 6mm stainless pin. It is supplied with an anti-drill, British made Lowe & Fletcher RPT Lock.

DA6601 Right Hand Drive
DA6602 Left Hand Drive

DOOR HINGE GUARDS – DEFENDER

da1398

The hinge guard is built to exact specification and was developed to fit all Defender models and years. It has been engineered for maximum protection and ease of fitment. Each Hinge Guard kit consists of two CAD engineered stainless steel plates which fit inside of each hinge point, restricting outward movement of the door with the bulkhead bolts removed. Fitting the Hinge Guards is incredibly easy with comprehensive fitting instructions supplied. Each door kit can be easily fitted in 20-30 minutes. After installation, only the top of each plate can be seen, providing an unobtrusive modification and deterrent to would-be thieves.

DA1398 2 Door Kit
DA1399 4 Door Kit