SDB100830 - BRAKE DISC VENTED FRONT - FREELANDER 1 UP TO 2000 MY
Supplier: Land Rover | Type: Genuine | Product: SDB100830
Share this product
Details of SDB100830
Terrafirma brake discs offer increased bite from cold and excellent fade resistance in most 4WD braking applications. Whether its a steep rocky descent, ploughing through mud and water or just daily driving these brake discs will give excellent stopping performance in all conditions.
Grooves are machined into the brake disc to force away the dust and gasses that build up between the pad and disc, keeping the brakes cooler and reducing fade. The cross drilling contributes to cooling and heat dissipation and also allow the gasses to escape. Of course they fill with mud when off road, clean them out afterwards when washing the vehicle to maintain performance and pad life. With the angled grooves it is found that they self clean in most cases. Quality machining to high tolerances using the correct materials ensure Terrafirma brake discs will withstand any test.
With overweight four-wheel drive vehicles with oversize tyres its important to find a set of brake pads that really do perform. A heavily laden expedition vehicle will quickly overheat brakes, very large tyres fitted to off road vehicles also require extra brake pedal pressure to stop them turning. Many so-called performance pads are better suited to sports type driving styles where heat is required and can be maintained to enable the pads to really work. Even some well-known brands require the temperature to build up before they start to work effectively.
To get the best from Terrafirma Cross Drilled and Grooved (CDG) brake discs we recommend the use of high quality brake pads such as Lockheed or TRW for best results. These pads give good bite from cold, work well off road especially in low range with high torque engines and transmissions driving against the brakes. They have high wear resistance, low noise and above all when combined with Terrafirma CDG brake discs give a much improved braking performance
For Terrafirma brake discs part numbers it is possible to simply apply CDG suffix to the original part numbers.
7cm x 30cm x 37cm
Copy the link below to feature this product in a forum post: